- Hydraulic motor model with operating motor is 220V-50Hz Hydraulic with absorbed power 220W.
- Beam length up to 5m
- Current drawn 1A and range speed motor from (1400- 2800) rpm.
- Included a pump, which can deliver flow rate from 1.5 to 3 1/min.
- Durable with duty cycle 40%, opening and closing time from 3s to 6s.
- Electronic control unit 800W, 220V-50Hz, includes two operating logic's and possibility to control the closing, opening and pause time.
- Operating push button switch
- The system is protected against over load and short circuit via thermal cutout on motor winding
- The barrier can be operated manually by release device by triangular key.
Data Sheet (124KB)
- Hybrid automatic barrier
for beams measuring 2 to 8 m
- Hybrid technology: Hydraulic + Brushless motor
- Barrier with "unlimited" springs: over 2,000,000 continuous use cycles without
- Extreme logistics optimisation: only one barrier model and two springs
for sectional beams measuring 2 to 8 m, right or left version and for
- Removable housing available in 4 colours or stainless steel
- High opening speed (selectable electronically): from 1.5 seconds
for 2 m gateways up to 6 seconds for 8 m gateways.
- Easy-to-program and technologically advanced control unit:
Integrated encoder (with reverse in the event of obstacle),
two integrated Loop Detectors, assorted Master/Slave
logics and management (opposing barriers)
- Available with 5 RAL housing color:
Data Sheet (700KB)